More Saw… More Features… More Economy
Handy adjustment knob provides accurate micrometer adjustment of rip fence.
Big Capacity – cuts to center or 48 inch panel – cuts stock 2 1/4 inches thick.
Fence is 24 7/8 inches long by 2 inches high – extends full length of table – locks front and back – used either side of saw blade.
Accurate channel guide bars used front and back – front guide bar indexed and notched for micrometer setting rip fence.
Handy adjustment knob provides accurate micrometer adjustment of rip fence.
Big 22 inch by 25 inch table surface (with extensions) – scientifically ribbed to prevent warping – carefully ground to provide smooth accurate working surface.
11¾ inches of table in front of saw blade on a maximum cut 2¼ inches thick. Plenty of table support for large work.
Controls are conveniently located in front of machine safe and easy to operate,
Lock knob in center of blade raising and tilting mechanism assures positive locking, safe operation.
Famous auto-set miter gage with individually adjustable indexed stops, taper pivot and stop rods,
Heavy, Steel Cabinet provides strong, rugged base for the saw.
Strong, rigid motor mounting tilts smoothly and easily with the saw arbor. takes small frame motors.
Blade guard offers added protection – tilts with blade,- splitter and anti-kickback fingers keep work from pinching and being thrown back at operator.
Accurate calibration on all machine settings.
Convenient 34½ inch table working_height on steel stands. Sealed, lubricated-for-life ball bearings.
Model 34-500
You get extra large capacity of cut with the new Delta Homecraft 8 inch bench model tilting arbor saw. With it you can cross cut and rip stock a full 2 1/4 inches thick.
Another big feature of this saw is the large capacity on bevel cuts. Will cut to a 1 9/16 inch capacity at the full 45 degree tilt. This means you can do many different types of work with ample capacity.
With a single pass over the dado head, cuts 13/16 inch wide are easily made. Here again, you get a large capacity – enough to do most jobs with capacity to spare.
You get extra large capacity of cut with the new Delta Homecraft 8 inch bench model tilting arbor saw. With it you can cross cut and rip stock a full 2 1/4 inches thick.
Large table provides plenty of working surface. Table is 22 inches deep by 25 inches wide with two 22 inch by 5 inch extensions. Made of fine grained grey iron castings scientifically ribbed to prevent warping.
The hand wheels for the blade raising and arbor tilting mechanism are conveniently located at the front of the machine. Lock knobs provide added accuracy. All adjustments are fast, safe and easy to make.
No. 34-500 – 8-inch Tilting Arbor Circular Saw complete with Rip Fence, Rip Fence Guide Bars, No. 564 Auto-set Miter Gage, No. 3254 8-inch Combination Saw Blade, Standard Table Insert, Arbor Pulley and Motor Cord. Without No. 34-964 Table Extensions, No. 34-967 Blade Guard, Motor Pulley, or Motor.
