Sanding and polishing machines of the type of the new Delta 6 Inch Belt Sander No. 1400, shown above have hertofore either been too small and lightly built to be of any value in the shop doing serious work, or else they have been too expensive to be within the reach of the small shop.
Here, for the first time, is a sander that is heavy and husky enough to do any of the myriad of sanding and polishing operations that may be found around the amateur or professional shop, and yet which sells at a price that brings it within the reach of every shop, large or small.
Into the design of this machine it has going all of Delta’s years of experience in design and manufacture, experience matched by no other manufacturer in this field. It incorporates everything of practical value that can be built into a sander of this type, plus the highest grade of material, design and manufacture.
In addition to its many mechanical advantages, it is of pleasing design, nad the unused portion of the sanding belt is completely enclosed and guarded in accordance with stringent safety requirements. It is by far the safest and most thoroughly guarded machine of its type on the market, regardless of size or price.
No. 1400 Belt Sander only as shown above but without fence, back stop or table. With one No. 80 grit lapless garnet belt. Without belt or motor pulley. (Shipping Weight 110 lbs.)… $28.85
No. 560 V-belt (56″ inside circumference)… $1.00
No. 5500 5″ diameter motor pulley, 3/4″ bore… $.75
No. 1401 Tilting table for No. 1400 Sander… $5.50
No. 1403 Backstop complete with bracket… $1.60
No. 1410 Wood Fence (3-1/4″ by 17-1/2″) with brackets
No. 891 Steel Stand (Top, 7-7/8″ by 15-7/8″ by 24-1/4″ High)… $6.85
No. 1402 Belt-Sander Unit, consisting of No. 1400 Sander, No. 560 V-belt, No. 5500 5″ V-Pulley 3/4″ bore, and No. 891 Steel Stand. Without fence, backstop or table. (Without fence, backstop or table. Without motor, belt guard or switch rod)… $37.45
No. 1411 Belt guard for Sander, complete with screws… $6.85
Belt Sander Specifications
- Overall dimensions: 28″ long; 13″ wide’ 8-1/2″ high horizontal: 26-1/4″ high vertical.
- Completely ball-bearing equipped. Double-seal bearings, lubricated at the facory for life.
- Completely enclosed and guarded in accordance with all safety requirements.
- Exceptionally heavy main drive shaft, carrying large diameter drum (5-1/2″). Large driving pulley to transmit power.
- No rubber covering required on drums thus eliminating one source of replacement expense.
- Adjustable deflector on drum hood catches practically all sawdust. hood is provided with suction spout.
- Machine operates vertically as well as horizontally.
- Lapless sanding belts, 6″ wide by 49-5/16″ long. Belts are lapless to insure accurate work and longer life, especially on metal work.
- Tilting table, 7-1/2″ by 14-3/4″, with 3/8″ by 3/4″ groove for miter gage, is available for use in vertical position.
- Adjustable fence for edge sanding and adjustable back stop for flat sanding are available for use in horizontal position.
- Welded steel stand available to make machine completely portable.
- Belt guard available to complete guarding of machine.
