This Delta 1426 Disk Sander was designed to meet every requirement for accurate sanding. This was not just another sander, but a high grade machine tool for equally high-grade work. From its completely machined, true-running 12″ disk to its large surface table and its husky spindle, carried on self-sealed ball bearings, it is designed for long life, low power consumption and accurate, dependable results. The direct-motor-drive model can be used with any of our standard 1/2-H.P. motors in 8-1/2″ frame.

The disk in this model fits directly onto the end of the motor shaft and makes the unit completely self-contained. The belt-drive model makes it possible to use any available motor; to use motors built for odd voltages or frequencies, or to vary the speed to suit individual jobs. Disk is specially machined to insure proper adhesion of abrasive disks, and the use of “Distic” for applying disks adds the last touch of convenience to the machine. There is no need for messy gluing of disks, no removal of the disk from the machine, no waiting overnight for the new abrasive disk to dry. Abrasive disks can be renewed every few minutes if the operation makes it necessary.

For Finishing. Squaring Mitering. Fitting. Grinding On Wood. Metal Plastics and Many Other Materials.

From the pattern shop to the production line in the plant, the Delta 1426 Disk Sander was adaptable to a very wide variety of operations.

In addition to its usefulness for accurate sanding, it can be used for finning and finishing plastics, bone, celluloid and similar materials; it is used for light grinding and finishing in the metal shop. or for squaring, plain and compound miters. disk and curved-work finishing-for all work where accurate finishing to a line or layout is important.

Delta 1426 Disk Sander (page reference)